note: all specifications are subjec t to change without notification. scd's for these devices should be re viewed by ssdi prior to release. data sheet #: tr0126b doc solid state devices, inc. 14701 firestone blvd * la mirada, ca 90638 phone: (562) 404-4474 * fax: (562) 404-1773 ssdi@ssdi-power.com * www.ssdi-power.com designer?s data sheet part number / ordering information 1 / SFT10015 __ __ scre ening 2 / __ = not screened tx = tx level txv = txv level s = s level package /3 = to-3 SFT10015 50 amp npn darlington transistor 400 volts features: ? bv ceo 400 volts ? low saturation voltage ? 200 o c operating temperature ? hermetically sealed, isolated package ? tx, txv, s-level screening available. consult factory. application notes: SFT10015 darlington transistor is a direct replacement of motorola mj10015. it is designed for high voltage, high speed, power switching in inductive circuits where fall time is critical. it is particularly suited for line operated switchmode applications such as: ? switching regulators ? inverters ? solenoid and relay drives ? motor controls ? deflection circuits maximum ratings symbol value units collector ? emitter voltage v ceo 400 volts collector ? emitter voltage v cev 600 volts emitter ? base voltage v eb 8 volts collector current continuous peak i c i cm 50 75 amps base current continuous peak i b i bm 10 15 amps total power dissipation derate above 50oc @ t c = 25oc @ t c = 100oc p d 250 143 1.43 watts watts w/oc operating & storage temperature t j & t stg -65 to +200 oc maximum thermal resistance (junction to case) r 0 jc 0.7 oc/w notes: to-3(/3) 1 / for ordering information, price, operating curves, and availability - contact factory. 2 / screening based on mil-prf-19500. sc reening flows available on request.
note: all specifications are subjec t to change without notification. scd's for these devices should be re viewed by ssdi prior to release. data sheet #: tr0126b doc solid state devices, inc. 14701 firestone blvd * la mirada, ca 90638 phone: (562) 404-4474 * fax: (562) 404-1773 ssdi@ssdi-power.com * www.ssdi-power.com SFT10015 electrical characteristics, t c = 25 oc symbol min typ max units collector ? emitter sustaining voltage (i c = 100 ma, i b = 0, v clamp = 400 v) v ceo(sus) 400 ?? ?? volts collector cutoff current (v cev = 600 v, v be ( off ) = 1.5v) i cev ?? ?? 0.25 ma emitter cutoff current (v eb = 2v, i c = 0) i ebo ?? 160 350 ma dc current gain* (v ce = 5v) i c = 10 a i c = 20 a i c = 40 a h fe ?? 25 10 185 125 50 ?? ?? ?? collector-emitter saturation voltage* i c = 20 a, i b = 1 a i c = 50 a, i b = 10 a v ce (sat) ?? ?? 1.3 2.1 2.2 5.0 volts base-emitter saturation voltage* i c = 20a, i b = 1a, t c = 25oc v be (sat) ?? 2.05 2.75 volts diode forward voltage i f = 20 a v f ?? 2.0 5.0 volts safe operating area, dc (1 sec) 5v, 50a 20v, 8.75a 100v, 0.3a soa 1 soa 2 soa 3 ?? ?? ?? output capacitance (v cb = 10v, i e = 0a, f = 1mhz) c ob ?? 250 750 pf delay time switching times, resistive load v cc = 250 v, i c = 20 a , i b1 = 1 a, v be (off) = 5 v, tp = 25 ? s, duty cycle 2% t (on) t d t r ?? ?? 0.15 1.0 0.3 1.2 s s rise time storage time t (off) t s t f ?? ?? 2.2 0.95 2.5 1.2 s s fall time storage time switching times, inductive load, clamped i c = 20 a(pk), v clamp = 250 v, i b1 = 1 a, v be ( off ) = 5 v, t c = 25oc t sv ?? 12 ?? s crossover time t c ?? 7.3 ?? s notes: * pulse test: pulse width = 300sec, duty cycle = 2% case outline: to-3 pin out: case ? collector 1 ? base 2 ? emitter
|
